Temperature Reduction Device

Temperature Reduction Device Series

The Cooling Device System Consists Of A Feedwater Regulating Valve, A Mixing Pipeline, A Shut-off Valve, A Check Valve, A Filter, Etc. The Cooling Water Is Atomized And Sprayed Into The Mixing Pipeline Through A Nozzle To Reduce The Steam Temperature. The Temperature Signal Is Detected By The Thermal Resistance At The Outlet Of The Device And Input Into The DCS Control System (or Automatic Control Cabinet). The Valve Position Signal Is Sent Out By The DCS Control System (or Automatic Control Cabinet), And The Valve Opening Is Controlled By The Actuator To Form A Closed-loop Control System, Achieving Stable Cooling.

The Cooling Water Is Sprayed Out Through The Mechanical Atomization Nozzle (cylindrical Porous Nozzle) Set Inside The Cooler, Quickly Mixed With The High-speed Flow Of High-temperature Steam And Rapidly Reduced To Low-temperature Steam. Due To The Use Of A Special Mechanical Atomization Nozzle Hole Flow Design Method, The Atomization Effect Of Steam At Lower Flow Rates Is Ensured, And The Accuracy Of Regulation Is Improved. Accuracy And Stability. And It Can Avoid Water Hammer Caused By Accumulated Water In The Pipeline, Achieving The Required Parameters Of The User And Achieving A Good Temperature Reduction Effect. Due To Our Company's Continuous Efforts In Closely Integrating Technology Development With Practice. Several DN1600mm Cooling Devices Are Currently Operating Stably In Major Sugar Factories In Guangxi.

Series Table Of Temperature Reduction Devices

Series Table Of Temperature Reduction Devices