Low, Medium And High Pressure Temperature And Pressure Reduction Device

Series Charts And Main External Dimensions

The WY Series Temperature And Pressure Reduction Device Diagram Only Provides More Than Ten Series Of Diagrams For Users To Choose From Based On The Control Mode Of The Valve (angular Or Linear Electric Actuator) And The Type Of Safety Valve Selected (impulse Safety Device Or Spring Safety Valve), For Reference Only. Because In Practice, Depending On The User's Different Parameters, There May Be More Than One Safety Valve And The Presence Or Absence Of A Throttle Orifice Plate, Therefore The Total Length L And Weight Are Reference Values. Please Contact Our Company To Request Construction Design Drawings During The Selection Process.

Low Pressure Temperature And Pressure Reduction Device Series Table

Series Table Of Medium Pressure Temperature And Pressure Reduction Devices

Series Diagram Of Pneumatic Temperature And Pressure Reduction Device

This Device Is Powered By Gas To Achieve Automatic Control, Reducing The Pressure And Temperature Of The New Steam To The Parameters Required By The User. Specially Suitable For Working Environments That Require Strict Fire Prevention. The System Composition And Working Principle Are The Same As Those Of The Electronic Temperature And Pressure Reduction Device, Except That The Control Of The Temperature And Pressure Reduction Valve And The Water Supply Regulating Valve Is A Pneumatic Diaphragm Actuator. The Actuator Is Equipped With A Valve Positioner, Which Converts The Electrical Signal Output By The Regulator Into A Pneumatic Signal That Drives The Valve To Move, And Drives The Valve Core To Move In Accordance With The Input Signal, With Fast Action And High Sensitivity.

Pneumatic Actuator: Multi Spring Thin Film Actuator (customizable By Users)

Valve Positioner: Electric Pneumatic Valve Positioner

Input Signal: 4-20Am

Input Impedance: 250Q

Gas Supply Pressure: 0.4-0.7MPa

Environmental Temperature: -20~60 ℃

Negative Pressure Temperature And Pressure Reducing Device

This Device Can Reduce The Positive Pressure Value Of A Single Steam To A Negative Pressure Value Through Temperature And Pressure Reduction, Making It Particularly Suitable For Supplying Steam To Low Vacuum Equipment. After Being Equipped With Intelligent Actuators, The Device Can Be Directly Integrated Into The DCS Control System. It Can Also Be Equipped With Our Company's Automatic Control Cabinet To Achieve On-site Control Adjustment And Operation, With High Adjustment Accuracy, Fast Response Action, And High Sensitivity.

Thermal Exchange Minus Temperature And Pressure Reducing Device

This Device Is Used To Generate A High-speed Steam Flow Through A Nozzle At A High Pressure Drop, Mix It With Steam Below The Outlet Parameters, And Then Increase The Pressure Through A Diffuser To Achieve The Required Pressure And Temperature At The Outlet.

This Device Is An Energy-saving Product That Uses Waste Low-temperature And Low-pressure Steam To Replace The Water Supply System And Pumps Of Ordinary Pressure Reducing Devices, Greatly Simplifying The Equipment And Reducing The Occupation Of Space And Project Investment; It Is Recommended To Install Flow Control Valves Separately At The Steam And Low-pressure Steam Inlets During Use.

This Device Is A New Product Developed By Our Company, Which Has Achieved Satisfactory Results And Good Economic Benefits Through User Use. We Welcome Users To Come And Place Orders. Our Company Can Design And Manufacture According To The Provided Parameters And Requirements.