Electric Fusion Reducing Tee

Electric Melting Fittings Refer To Those That Can Withstand The Temperature Generated By Electric CurrentMeltA Plastic (polyethylene) Pipe Accessory That Achieves Connection. Capacity (i.e. Amperage) Is The Main Parameter, And In Some Low-voltage Circuits, Voltage Requirements Are Not High, Only Amperage Is Required.

1. Development Of PE Pipeline System

PE (polyethylene) Is A Series Of Resins That Can Be Produced By Various Processes, With Multiple Structures, Characteristics, And Uses, And Has Occupied The WorldSynthetic ResinOne Third Of The Production, Ranking First. The Application Of PE Pipes Began In The 1940s, Initially Used As Telephone Line Conduits And Mine Non Pressure Drainage (low-density PE Pipes). In The Mid-1950s, PE Pipes Were Used For Water Supply (high-density PE Pipes). Since The Mid-1960s, PE Pipes Have Been Used For Natural Gas Transmission And Distribution (using Medium To High-density PE Pipes). PE Pipeline System Has Become The Second Most Consumed Plastic Pipeline Variety In The World After PVC-U Pipes. Widely Used In Fields Such As Gas Transmission, Water Supply, Sewage Discharge, Agricultural Irrigation, Oil Fields, Mines, Chemical Industry, And Postal And Telecommunications.

2. Characteristics Of PE Electrofusion Fittings

AtPolyethylene PipelineIn The Sales And Application Of The System, About 15% To 20% Of The Sales Revenue Belongs To Pipe Fittings. The Pipe Fittings Of Polyethylene Pipeline Systems Are Mainly Divided Into Two Types: Hot-melt Pipe Fittings And Electric Melt Pipe Fittings. Due To Price Reasons, The Amount Of Hot-melt Pipe Fittings Used In Engineering Applications Is More Than That Of Electric Melt Pipe Fittings. However, Electric Melt Pipe Fittings Play An Important And Irreplaceable Role In Engineering And Maintenance, Especially In Construction Where They Are Less Affected By External Environment And Human Factors. Therefore, They Have Better Reliability And Are More Popular Among Users. Electric Fusion Fittings Are Increasingly Being Used In Gas Pipeline Engineering. At The Same Time, Due To The Complex Production Technology, High Cost, And High Sales Price Of Electric Melting Pipe Fittings, The Profit Margin Of Electric Melting Pipe Fittings Production Plants Is Also High, Making It A Hot Investment Topic.

Meanwhile, Due To The Fact That The Substrate Of The Electric Melting Pipe Fittings Is Made Of PE MaterialPE PipeComposed OfPE PipeThe Pipeline System Together Solves Two Major Problems Of Traditional Pipelines: Corrosion And Leakage At Joints. Its Advantages Are Mainly Reflected As Follows: (1) Corrosion Resistance: Long Service Life; (2) No Leakage At The Joint: Using Electric Fusion Fittings For Connection Essentially Ensures The Consistency Between The Interface Material, Structure, And Pipe Body Of The PE Pipeline System, Achieving Integration Between The Joint And The Pipe Material; (3) It Can Effectively Resist Underground Movement And End Loads: After The PE Pipeline System Is Connected By Fusion Welding Method, The Joints Based On This Method Can Withstand End Loads Without Joint Leakage. Meanwhile, The Stress Relaxation Characteristics Of PE Can Effectively Dissipate Stress Through Deformation, So In Most Cases, Expensive Anchoring Is Not Required At Joints And Bends. Based On Its High Toughness,Elongation At BreakGenerally Exceeding 500%,PE PipeThe Road System Has A Strong Adaptability To Uneven Settlement Of Pipe Foundations.